Thank you! Message Sent!
ERROR: Message Not Sent!
*Name


*Email


Phone


*Question


Download PDF of this page  Print this page

Series 57 Tool Post Grinder Internal & External Grinding Kit

  • Tool Post Grinder Internal & External Grinding Kit (Interchangeable Spindle) | Dumore Series 57
  • Tool Post Grinder Insert Spindle & Inserts | Dumore Series 57 Tool Post Grinder Internal & External Grinding Kit
    Tool Post Grinder Insert Spindle & Inserts | Dumore Series 57 Tool Post Grinder Internal & External Grinding Kit
  • Tool Post Grinder Diamond Wheel Dresser Assembly | Dumore 534-001
    Tool Post Grinder Diamond Wheel Dresser Assembly | Dumore 534-001
  • Tool Post Grinder Wrench Set | Dumore Series 57 Tool Post Grinder
    Tool Post Grinder Wrench Set | Dumore Series 57 Tool Post Grinder

The Series 57 interchangeable spindle tool post grinder internal & external grinding kit includes spindles and accessories for both internal and external grinding, and your choice from four motor options - 1/2 HP, 3/4 HP, 1 HP single phase, or 1 HP 3-phase.

Dumore Series 57 tool post grinders, for lathes with 9" to 20" swing, are capable of external grinding with grinding wheels up to 6" diameter and internal grinding to 18" deep, depending on the spindle selected.

Belt and pulley combinations provide nine spindle speeds. The coil spring applies constant tension to compensate for belt stretch, assuring proper alignment and vibration-free grinding.
 

Each Series 57 Internal & External Grinding Kit includes:

  • Tool Post Grinder & Selected Motor
  • Belts & Pulleys
  • Insert Spindle (802-0024)
  • Spindle Inserts
    • Mounted Point Spindle Insert (423-0015)
    • Internal Spindle Insert, 3 3/8" (423-0008)
    • External Spindle Insert (423-0004)
  • Mounted Points, General Purpose
    • 1/8" W160 (777-1160)
    • 1/8" W193 (777-1193)
    • 1/4" W203 (777-1203)
    • 1/4" W225 (777-1225)
  • Grinding Wheels, General Purpose
    • 5/8" (774-0005)
    • 1" (774-0018)
    • 3" (774-0078)
    • 4" (774-0098)
    • 5" (774-0110)
    • 5/8" (774-0005)
  • T-Bolt Mounting Post
  • 8' Cord
  • Wrench Set
  • Diamond Wheel Dresser
  • T-Bolt Mounting Post
  • Case