Thank you! Message Sent!
ERROR: Message Not Sent!




Download PDF of this page  Print this page

Grinding Wheels
Series 12 & 25 Tool Post Grinder Internal Spindles

Grinding Wheels | Dumore Series 12 & 25 Tool Post Grinder Internal Spindles

Dumore offers a range of grinding wheels for the Series 12 and Series 25 tool post grinders to meet the majority of grinding applications.

Each grinding wheel has a "Use Code" designating the intended use:

1 = General-purpose. For steels up to Rockwell C45 hardness
2 = For cast iron, brass and other non-ferrous materials, including Sulzer Metco 445, 447, and 18C plasma spray coatings
3 = For stainless steels, Rockwell C45-C59 hardness steels, and all stainless steel based plasma spray coatings
4 = For steels of Rockwell C60 hardness and higher
5 = For hard and soft rubber
6 = For carbide

Grinding wheels for the Series 12 and Series 25 tool post grinder internal spindles are made from aluminum oxide (A) or silicon carbide (S) as denoted by the "Wheel Material Code".

The 8" Internal Spindle (799-0028) and 16" Internal Spindle (799-0029) each handle 1/2" bore diameter standard grinding wheels up to 6" wheel diameter, 3/4" wheel thickness. Their maximum recommended speed is 8,000 rpm. Use of these spindles on Series 25 tool post grinders also requires the Series 25 Spindle Adapter Kit (858-0035).

Also see grinding wheels for use with the 8" External Spindle (807-0016), up to 8" wheel diameter, and grinding wheels for use with the 12" External Spindle (889-0011), up to 12" wheel diameter, for Series 12 and Series 25 tool post grinders.